*
AVESTA - Optical Chopper OCV-10kFD
ENGLISH  RUSSIAN
HOME | COMPANY | CONTACTS | SUPPORT  
    LASERS
  Femtosecond Fiber Lasers  
  Femtosecond Kits  
  Yb-doped Solid-State Femtosecond  
  Ti:Sapphire Femtosecond  
  Ti:Sapphire Continuous Wave  
  Cr:Forsterite Femtosecond  
  Cr:Forsterite Continuous Wave  
    AMPLIFIERS
  Yb Regenerative  
  Ti:Sapphire Regenerative  
  Ti:Sapphire Multipass  
  Cr:Forsterite TW system  
  Cr:Forsterite Regenerative  
    DIAGNOSTICS
  Scanning autocorrelators  
  Single-shot autocorrelators  
  Spectrometers  
  Cross-correlators  
  SPIDER  
    COMPONENTS
  Pulse compressors  
  Pulse pickers  
  Harmonic generators  
  THz generator  
  Raman shifters  
  Faraday isolators and rotators  
  Optical choppers  
    OPTOMECHANICS
  Catalogue  
Avesta Ltd.
P. N. Lebedev Physical Institute,
Laboratory building,
Troitsk, 142190,
Moscow region,
Russian Federation

Tel: +7 495 967 94 73
Tel: +7 496 751 00 78
Fax: +7 495 646 04 95

E-mail:
  Optical Chopper OCV-10kFD | Optical Chopper OCV-4500F | Optical Chopper OCV-4500 |

Optical chopper
Model: OCV-10kFD

High frequency range (1 Hz – 10.5 kHz) *
High frequency stability (<100ppm) *
Low phase jitter (<0.6° rms, 1 kHz) *
Phase shift ±180° *
External frequency capture *
Ñhopping on harmonics and sub-harmonics *
PC synchronization (COM è USB) *

 
 

zoom in

The OCV-10kFD opto-mechanical modulator (chopper) is widely used in different optical experiments. It comprises a microprocessor control unit and precise Swiss drive. The device features harmonic and subharmonic generator, sync input and output ports, and PC USB connection.
 
OCV-10kFD
Frequency range, Hz 1-10500
Chopping frequency with 2/100-slot blade*, Hz (1 – 160) / (50-8000)
Chopping frequency with 10-slot blade, Hz 20-1400
Chopping frequency with 60-slot blade, Hz 100-8000
Chopping frequency with 100-slot blade**, Hz 500-10500
Phase instability peak-to-peak (standard), º 3 (0.6)
Phase instability peak-to-peak (standard), at 1 kHz 3 (0,6)
Input/output BNC signal level TTL/CMOS
Internal generator frequency range, Hz 0,001 - 1000000
Minimum reference pulse duration, ns 45
Phase shift range, º -180 - +180
Phase shift step, º 0,1
External frequency range, Hz 4 – 1657500
External reference multiplier (harmonics) 1-255
External reference divider (subharmonics) 1-255
Controller unit dimensions, mm 255õ205x85
Power supply voltage 47-63 Hz, V 110-220
Power consumption, W <30
* - the blade has 100 slots on external circle and 2 slots – on internal one. The frequency is stabilized on external circle (high frequency), but optical beam is chopped on internal one (low frequency). The phase shift range is from -180° to +180° according to the high frequency (on external circle).
** - the optical aperture with a 100-slot blade is 1.5 mm



  
©1998-2012 Avesta Ltd.                           HOME | COMPANY | CONTACTS | SUPPORT